Phone: 513.860.4050  •  Fax: 513.860.3998  •  info@steelconcreteforms.com
Concrete Curb Forming SystemsConcrete Curb and Gutter FormsConcrete Sidewalk FormsFlexible Concrete FormsConcrete Paving FormsConcrete Barrier FormsConcrete Forming AccessoriesHow To OrderDownload Ohio Forms Catalog

Concrete Curb Forming Systems

Send Inquiry/Place Order
Full batter curb
Full batter curb
Partial batter curb with one-piece front form
Partial batter curb
with one-piece front form
Partial batter curb with two-piece front form
Partial batter curb
with two-piece front form
Straight curb formed with two common back forms
Straight curb formed
with two common back forms
Adjacent curb form with division plates
Adjacent curb form with
division plates

Cost-saving features of the curb forming systems by OHIO FORMS:

  • The same back form can be used with various front form set-ups for straight, partial, or full-battered concrete curbs.
  • Accurate assembly to prescribed cross-sections and full 3" wide head and base with overturned flanges makes for fast setting and stripping.
  • Full length double-wedged pockets allow stakes to firmly anchor forms to subgrade. Two pockets per form are standard. A third pocket can be added for an additional charge.
  • For a maximum return on investment, all forms are fabricated from rugged 10-gauge carbon steel to ensure strength and long life.
  • Dowel joint connections are made from heavy angle iron, welded to the inside face of the forms for added strength. Protruding fixed dowels provide positive alignment to form sections, and permit division plate removal without formstripping - even on battered curbs. Standard dowels are 1/2" diameter by 1-1/4" long.
  • Single or two-piece front forms are available for partial-battered curbs. The two-piece set-up allows early removal of top form for hand finishing. Either top or bottom section can be used separately.
  • All forms available in standard or custom sizes/configurations.
  • Ask about division plate price discounts when ordering together with forms.

SPECIFICATIONS

Concrete Curb Forms (Dowell Joint)
Part Number Prefix: CFDJ
Height of Curb Straight Back or Front Form 1-Piece Partial Batter Front Full Batter Front Form Weight (lbs.) per 10' Section Stake Length Required
8" 27-61 27-64 27-67 76 24"
9" 27-62 27-65 27-68 82 24"
10" 27-63 27-66 27-69 98 30"
12" 03-36 16-51 06-19 102 30"
13" 03-37 16-52 06-20 108 30"
14" 03-38 16-53 06-21 115 36"
15" 03-39 16-54 06-22 121 42"
16" 03-40 16-55 06-23 127 42"
18" 03-41 03-83 06-24 141 42"
20" 03-42 16-58 06-25 152 48"
22" 03-43 16-60 06-26 164 48"
24" 03-44 16-62 06-27 175 48"

back to top

Form sets are available for all three curb types shown. For quotation, send us cross-sectional dimensions of your curb, per instructions on page 10.
Form sets are available for all three curb types shown. For quotation, send us cross-sectional dimensions of your curb, per instructions on How to Order page.
Battered Face Forms for Two-Piece Set-Up
Part Number Prefix: BFF2-
Height of Batter Part Number Weight (lbs.) per
10 Form
6" 27-70 62
7" 27-71 67
8" 27-72 72
 
Double Wedge Stake Pockets
Part Number Prefix: SP-
Height of Curb Part Number Weight (lbs.) per
Stake Pocket
12" - 13" 01-52 4.0
14" - 17" 07-57 6.0
18" - 21" 08-37 8.0
22" - 24" 08-44 10.0

DIVISION PLATES FOR CURB FORMS

  • Division plates by OHIO FORMS are slotted to fit over the dowels between the form sections, for easy removal without stripping the front forms. Therefore they cannot occur at intervals of less than 10 feet.
  • Division plates are made from standard 10 gauge, or heavy-duty 7 gauge carbon steel.
  • For partial and full-batter division plates, reference widest curb dimension.
  • Ask about division plate price discounts when ordering together with forms.
Divison Plates for Concrete Curb Forms - Standard (10 gauge)
Part Number Prefix: DPC10-
Height of Curb   Width of Curb
5" 6" 7" 8" 9" 10"
12" part no. >
lbs. ea. >
16-75
3.6
07-13
4.1
17-01
4.7
07-22
5.2
17-25
5.7
18-01
6.3
13" part no. >
lbs. ea. >
16-76
3.8
07-14
4.3
17-02
4.8
07-23
5.4
17-26
5.9
18-02
6.5
14" part no. >
lbs. ea. >
16-77
3.9
07-15
4.5
17-03
5.0
07-24
5.6
17-27
6.1
18-03
6.6
15" part no. >
lbs. ea. >
16-78
4.3
07-16
4.8
17-04
5.4
07-25
5.9
17-28
6.5
18-04
7.0
16" part no. >
lbs. ea. >
16-73
4.7
07-17
5.2
17-05
5.7
07-26
6.3
17-29
6.8
18-05
7.4
18" part no. >
lbs. ea. >
16-80
4.8
07-18
5.4
17-07
5.9
07-27
6.5
17-31
7.0
18-07
7.5
20" part no. >
lbs. ea. >
16-82
5.2
07-19
5.7
17-09
6.3
07-28
6.8
17-33
7.4
18-09
7.9
22" part no. >
lbs. ea. >
16-84
5.7
07-20
6.1
17-11
6.6
07-29
7.2
17-35
7.7
18-11
8.2
24" part no. >
lbs. ea. >
16-86
6.1
07-21
6.6
17-13
7.2
07-30
7.7
17-37
8.2
18-13
8.6

back to top

Division plate where front form is one-piece.
Division plate where front form is one-piece.
Division plate for two-piece partial batter form.
Division plate for two-piece partial batter form.
Division plate for non-battered adjacent curb form.
Division plate for non-battered adjacent curb form.
Division plate for adjacent battered curb form.
Division plate for adjacent battered curb form.
Divison Plates for Concrete Curb Forms - Heavy-Duty (7 gauge)
Part Number Prefix: DPC07-
Height of Curb
Width of Curb
5" 6" 7" 8" 9" 10"
12" part no. >
lbs. ea. >
16-75
5.0
07-13
5.8
17-01
6.5
07-22
7.3
17-25
8.0
18-01
8.8
13" part no. >
lbs. ea. >
16-76
5.3
07-14
6.0
17-02
6.8
07-23
7.5
17-26
8.3
18-02
9.0
14" part no. >
lbs. ea. >
16-77
5.5
07-15
6.3
17-03
7.0
07-24
7.8
17-27
8.5
18-03
9.3
15" part no. >
lbs. ea. >
16-78
6.0
07-16
6.8
17-04
7.5
07-25
8.3
17-28
9.0
18-04
9.8
16" part no. >
lbs. ea. >
16-73
6.5
07-17
7.3
17-05
8.0
07-26
8.8
17-29
9.5
18-05
10.3
18" part no. >
lbs. ea. >
16-80
6.8
07-18
7.5
17-07
8.3
07-27
9.0
17-31
9.8
18-07
10.5
20" part no. >
lbs. ea. >
16-82
7.3
07-19
8.0
17-09
8.8
07-28
9.5
17-33
10.3
18-09
11.0
22" part no. >
lbs. ea. >
16-84
8.0
07-20
8.5
17-11
9.3
07-29
10.0
17-35
10.8
18-11
11.5
24" part no. >
lbs. ea. >
16-86
8.5
07-21
9.3
17-13
10.0
07-30
10.8
17-37
11.5
18-13
12.0
  • 100 ft. of forms considered a minimum order.
  • All weights are approximate, and based on standard sizes and configurations.
  • All weights exclude stakes, loose hardware, and packaging.
  • All items priced on request.
  • Quoted prices are valid for 15 days from date of quote.
  • All items quoted F.O.B. Fairfield, Ohio.
  • Terms are net 30 days, upon credit approval.
Send Inquiry/Place Order

back to top

Ohio Forms